Tech specs:
- Fused Filament Fabrication (FFF) using 1.75 mm filament - PLA and ABS. Stock models are designed for 1.75mm filament but can be easily modified for 3mm filament use.
- 100-micron layer resolution capability; 150-200 microns optimal with 0.5mm nozzle.
- J-head 0.5mm nozzle is stock. Compatible with 0.35mm and 0.25mm j-head nozzle sizes.
- Build envelope: 8.5" x 8.25" x 8" (215mm x 210mm x 200mm) = approx. 550 cubic inches. For MendelMax Upgrade kits add 20mm to X & Y, 10mm to Z.
- 00str00der belt-driven extruder for fast and accurate extrusion.
- Heated build platform (MK2 heated). For KS we're fulfilling Black PCBs with yellow SMD LEDs (not pictured).
- Universal Y-Axis plate made from 6061-T6 aluminum; made in Boulder, Colorado.
- Exceptionally rigid aluminum extrusion construction. Smooth rails are outside of frame for added strength and travel.
- Deluxe belt-driven z-axis with precision leadscrews, matching brass nuts, thrust bearings, GT2 belts, GT2 pulleys, and acetal bushings.
- Efficient 4-motor design. The belt-driven z-axis performs better than direct-drive systems.
- Precision leadscrews are center-tapped for M4 screw especially for the PrismX; matching brass nuts; all made in Japan along with GT2 belts.
- Utilizes open source software tool chain: Pronterface, Slic3r, Marlin, and more.
- Molded-plastic parts are solid, strong, consistently precise, provide exceptional frame alignment.
- RAMPS 1.4 with Marlin Firmware customized for PrismX.
- ATX PSU with short-circuit protection, over-current protection, 30A of power on 12v, plenty of 5v power for add-ons.
- Power Switch for immediate manual override of heaters and motors.
- RAMPS 1.4 fulfilled by Terawatt Industries; green or black PCBs.
- Freeaduino MEGA2560 rev.3 with USB mini-B connector and blue LEDs.
- TFT Touch-Screen (not pictured, optional add-on) is the one at http://www.thingiverse.com/thing:38749.
- Noctua cooling fans. 80mm for RAMPS/Freaduino; 20mm for the hotend. 6 year manufacturer's warranty, extremely quiet.
- LM8UU bearings mounted with steel retainer rings for precise and affordable alignment.
- GT2 linear drive systems throughout.
- Proven design with a robust open-source history. We've made iterative improvements in bite-sized chunks and have proven them along the way - since 2012. Read more about 'Prism AliceBlue' below.
- Made in USA
- TW plans to offer other J-head nozzle sizes with the 00str00der as soon as possible.