Aug 30, 2012

New 3d printer - Eventorbot

New printer on the scene: Eventorbot. Nice design ...

Info from their page:
Eventorbot! Open source 3D printer. Simple with less materials. Frame is made of a single 4' long, 2 1/2" square tube (16 gauge/1.5mm/.0598" thick, cost: less then $20.00). With this design there is less plastic parts, stronger structure, all wires are hidden, and a more appealing/finish look. The unit is supposed to resemble a robotic arm with hydraulic tubes. It was designed for prints to be less effected by vibrations. With the 1 solid frame, any vibrations of any axis will cause the other axis to move with it. For example: If the X axis causes a slight vibration/1mm movement to the right, the Z and Y axis will also move that 1mm to the right. This will result in a better print as everything will remain squared.
Please like Facebook page for updates:

Links to download plans:

Aug 16, 2012

MakiBox - printing with plastic pellets

Jonathan Buford's MakiBox, 3d printer printing with plastic pellets with great potential in reducing printing material cost and recycling of old plastic.

Video with in depth technical overview of MakiBox:

Aug 11, 2012

TangiBot - low cost Replicator clone

Clone wars have just begun! TangiBot is 100% compatible Makerbot Replicator clone for 2/3 of the price. We will see how will Makerbot react to this, by launching nuclear lawyer strike or staying true to their Open Source roots.

From Kickstarter page:

Scanect by ManCtl - low cost 3d scanner

Skanect by ManCtl brings low cost Kinect based 3d scanner.

Here is very detailed guide how to scan with Skanect:

Aug 9, 2012

How to build portable 3d printer in a suitcase

Revision 3 video with Ben Heck on his portable diy 3d printer in a suitcase:

Aug 8, 2012

Pwdr - diy powder3d printer

It looks like powder 3d printing for your home manufacturing is getting closer with open source Pwdr. It will enable whole new range of possible printed models. Still in early development stages, but technology is advancing ...

More info on:

Pwdr is an open source powder-based rapid prototyping machine. Its goal is to promote experiments and innovations in powder-based rapid-prototyping. The machine is ready to use both the 3DP as the SLS process with minimal adaption, although the printer is currently prepped for 3DP.

More information on:

The Pwdr Model 0.1 consists of chassis, tool head and electronics. The printer entirely consists of off-the-shelf components. It has a simple design and can be built within a couple of hours. The machine is easy and affordable to build and modify. Building a Pwdr Model 0.1 machine costs about €1000,-.

The accompanying software for the Pwdr Model 0.1 converts the CAD model in a printable format. This file is then uploaded to the Pwdr Model 0.1 micro-controller. The machine is controlled by easy-to-use software that allow full control of the printing process.The Pwdr Model 0.1 software has been based on open source tools like Arduino and Processing.

A whole new range of materials become available for experimenting with open-source rapid-prototyping; for example, when using the 3DP process: gypsum, ceramics, concrete, sugar, etc. And when the SLS process is fully supported, plastic materials like ABS, PP, Nylon and metals become available as building material.A Hewlett Packard inkjet cartridge is used for the deposition of binder. The cartridge can be refilled with custom binders using a syringe. A custom binder of 20% alcohol and 80% water has been proven to work.

- Maximum build size: 125mm x 125mm x 125mm
- Print resolution (3DP): 96DPI
- Minimum vertical step size: 50μm
- Speed (depending on printed part): ±1 minute per layer

Aug 6, 2012

Stone Spray Project

Robot 3d printing with sand: Sand Spray Project. Autonomous swarms of those machines could do some serious stuff.

Stone Spray Project from Stone Spray on Vimeo.