Jun 18, 2017

New DIY CO2 Laser Cutter Project

Here is a new DIY CO2 laser cutter project from Instructables. It was developed by Michiel Deschout and uses relatively available materials and parts like 3030 aluminum T-slot profiles, Arduino and some 3d printed parts. The total cost was some 1900 Euro.
The presented setup uses 40W laser, but the power could probably be increased.






Very detailed step-by-step build guide with all the files can be found at:

https://www.instructables.com/id/Make-Your-Own-High-Quality-CO2-Lasercutter-With-To/



Here is the back side with 3d printed holders for the CO2 laser tube: