Sep 30, 2016

Cool 3D Printed Mesh Frame Bicycle

This bicycle looks very cool! Does anyone know more about it?

Update: it is probably not 3D printed but uses a carbon and kevlar woven istutruss system.

http://www.bikerumor.com/2013/10/22/ib13-kovit-revives-isotruss-carbon-tubed-frame-design/

Here is a PDF document about isotruss structures:

http://www.aoninvent.com/wp-content/uploads/2013/11/General-IsoTruss-Presentation3.pdf

Still, I was unable to find how exactly are they produced ...

They are wound and woven in complex machines:

http://www.isotruss.com/manufacturing/






























Video on isotruss industries:



Source of the photo: unknown, I found it on http://3dprintclub.tumblr.com/.

Turnigy Fabrikator Mini Review Compilation

Hobbyking Turnigy Fabrikator Mini is one of the cheapest 3d printers available. Here are several reviews that can help you decide is it worth to buy it.

Here is Herr Thomas:




Here is Dirk's review:




Here is Angus:



Looks it is a relatively good purchase ...

DIY SLS 3D Printer Made For 400 Euro

Vulcaman from Germany developed a DIY laser sintering (SLS) 3D printer that you can make for some 400 Euro or 450 USD.

Technical specifications:

  • 1W 445nm laser diode
  • 8 x 8 x 8cm build volume
  • 36 x 54 x 60cm outer dimensions
  • CORE-XY movement
  • speed: 60mm/s tested, 300mm/s possible
  • costs around 400€





































Video of the machine in action:



Since the nylon powder that commercial SLS printers use costs some 200€ per kilogram, developer used much cheaper black powder for powder coating. This gear was printed in black powder coating material at 60mm/s it has dimensions of 3 x 3 x 0,5cm and took one hour to print.





Project homepage with very detailed step-by-step build guide:

http://www.instructables.com/id/DIY-SLS-3D-Printer/

Let the cheap DIY SLS era begin!!!

Sep 29, 2016

PrusaHand Open Source DIY Prosthetic Hand

PrusaHand is an open source 3d printable prosthetic hand project that was developed by Jenik at Prusa Research company. As most of you know, Prusa is well known for his 3d printer designs and I3 kits.




Project homepage:

http://prusahand.org/

GitHub repository:

https://github.com/yenikCZ/PrusaHand




3D Printed Construction Mesh Structures

Here are some examples how 3d meshes can be used to reinforce building structures. This technique is probably much more useful and applicable then cement paste extrusion.


Mesh Mould uses steel wire:




Project description:
The research project Mesh Mould investigates the unification of reinforcement and formwork into a single robotically fabricated material system. During the first research phase a spatial robotic extrusion process was developed, allowing to examine the interdependencies of mesh typology and rheological behavior of concrete (see Mesh Mould 2012 - 2014).
The second research phase at the National Competence Centre in Research (NCCR) Digital Fabrication focuses on the translation of the structurally weak polymer-based extrusion process into a fully load-bearing construction system. The current research focuses on the development of a fully automated bending and welding process for meshes fabricated from 3 mm steel wire.
The research involves the development of a fabrication-, and structurally-informed mesh typology as well as the subsequent collaborative development of a specialized robotic end-effector together with the Agile & Dexterous Robotics Lab of Professor Jonas Buchli.
More information on this project can be found at:

http://gramaziokohler.arch.ethz.ch/web/e/forschung/316.html


digiFABTuring and their robot arm attached plastic extruder which is more similar to common 3d printheads and could be done in a home workshop:






Here is a complete wall system with 3d printed polymer matrix made by Branch Technology:




They 3D printed a 7-foot-tall-by-3-foot-wide wall in 30 hours, and are currently extruding at a rate of 1.5 pounds per hour. The wall has a spray foam insulation, concrete core and inside/outside finish layer.

More info:

http://www.architectmagazine.com/technology/this-architect-designed-wall-system-has-a-3d-printed-core_o


Elastic 3D Printed Bone Implants




More information can be found at:

http://www.sciencemag.org/news/2016/09/print-demand-bone-could-quickly-mend-major-injuries

3D printed livable house or garden shed?

Alex Le Roux 3d printed what he calls a "first 3D printed livable house in the United States". I would say it's a garden shed. You decide.































It was done on a Vesta machine:





























Vesta concrete 3d printer costs USD 8,999.00 and has 10ft x 10ft x 10ft build volume.

Project blog:

http://concreteprinter.tumblr.com/

Vest printers homepage:

http://www.vestaprinter.com/

Sep 28, 2016

How do robots make robotic babies?

Stork? No. WiFi and 3D printing. Obviously.




A team of scientists at Vrije Universiteit Amsterdam demonstrated how robots can evolve and reproduce. The first robot baby is a big step towards robotic ecosystems that can evolve in challenging environments. Two parent robots meet and exchange robotic DNA over WiFi which makes the baby in a 3d printer.


Original article in Dutch (Chrome Translate is your friend):

http://www.vu.nl/nl/nieuws-agenda/nieuws/2016/apr-jun/wereldprimeur-robots-planten-zich-voort.aspx


Happy 3D printed robotic family





























Robots evolving and reproducing? Welcome to 2016. Also: I see no connections with any SF movie plots out there.

3D Printed and Laser Cut Open Source DIY Air Purifier

Ian van Mourik, a product designer from the Netherlands developed and open sourced an air purifier anyone can make. It is autonomous since it is controlled with Arduino and uses simple fans to move air trough particle filters and activated carbon.
It costs around 70 Euro. It has some laser cut parts from plywood but you could cut them manually or use different structural support since they are mostly decorative.
Looks like a great solution to improve your home air quality by removing dust and destroy mold particles or pollen (which I'm allergic to). Just keep in mind to change the filters or upgrade them with HEPA. Carbon filters get used up relatively fast.

Here is the video presentation:




Detailed build instructions can be found at:

http://www.instructables.com/id/OPEN-SOURCE-AIR-PURIFIER/


3d printed air purifier parts that hold carbon and dust filters with fans that push the air

Prusa Gives Us Multi Material Upgrade with Dual and Quad Extrusion

Josef Prusa gives us a multi material extrusion upgrade for I3 Mk2 which looks great. It can come in dual and quad extrusion versions and will give you advanced options for your I3.

Here is the video presentation:




Final release is expected for shipping by the end of November 2016 and is it available for preorder.

  • 4 material version is $249 or €269 with VAT
  • 2 material version is $199 or €219 with VAT


Prusa homepage:

http://prusaprinters.org/original-prusa-i3-mk2-multi-material-upgrade-release/



Hadrian X Robotic Truck That 3D Prints Buildings With Bricks

Australian company "Fastbrick Robotics" developed a robotic truck system that can lay 225 bricks per hour. It's a big 3d printer on wheels that uses robotic crane to build houses.
It is not cement paste extrusion that can be found in other building 3d printers, but it is additive, digital and making BIG 3d objects.
Personally, I'm not even sure that cement paste extrusion is the best way to get commercially viable construction machine for industry wide adoption and application as a standard house building tool.

People like brick.


Here is an interesting video presentation:




Company homepage:

http://www.fbr.com.au/

It still needs some human assistance, so some jobs in construction field will be saved. Some. Few. For some time.



Sep 27, 2016

World's Largest 3D Print from ORNL

Oak Ridge National Laboratory made the world's larges 3D print that was recognized by Guinness World Records.

From project description:
Researchers at the MDF have 3D-printed a large-scale trim tool for a Boeing 777X, the world’s largest twin-engine jet airliner. The additively manufactured tool was printed on the Big Area Additive Manufacturing, or BAAM machine over a 30-hour period. The team used a thermoplastic pellet comprised of 80% ABS plastic and 20% carbon fiber from local material supplier

The tool has proven to decrease time, labor, cost and errors associated with traditional manufacturing techniques and increased energy savings in preliminary testing and will undergo further, long term testing.

Here is the time-lapse video of the process and it looks impressive:




ORNL homepage:

https://www.ornl.gov/news/3d-printed-tool-building-aircraft-achieves-guinness-world-records-title



Cheap 3D Printable RC Plane

If you own a 3d printed and want to get into RC flying on a low budget, here is a great project that will get you in the air.




























Here is a very detailed build guide from design in CAD software to first flight instructions on Instructables:

http://www.instructables.com/id/Design-Test-Print-Build-an-Aerodynamic-RC-Plane-Tu/?ALLSTEPS

Sep 26, 2016

Slovenian Makers 3D Printing and CNCing on Solar Power

IRNAS Institute is a Slovenian non-profit organization involved into DIY science projects, education and open source technology development.
They participate in many events and they demonstrated how additive and subtractive machines can be used powered by photovoltaic panels.


Here is their Troublemaker 3D printer in off-grid configuration:




Here is their GoodEnough Hybrid CNC making Aker planters on solar power:



Link to more extensive article and some other cool project by IRNAS:

http://irnas.eu/bio%20lab%20symbiolab,%20irnas,%20goodenoughcnc/2016/07/05/solar-powered-goodenoughcnc-and-diy-bioscience-at-art-kamp-lent-festival



Reinforcing thin concrete objects with 3d printed mesh

For some DIY projects you need thin concrete or cement walls. They are prone to brake under tension or fall impact.
Instructables user "ucn" from Singapore wanted to make strong thing concrete molded business cards and successfully reinforced them with 3d printed mesh frame. It looks that this technique works great and could be applied to other concrete projects where you need internal reinforcement structure.




Here is a detailed buold guide with prototypes that led to final sucess and strenght testing:

http://www.instructables.com/id/3D-Printed-Reinforced-Concrete-Business-Cards/?ALLSTEPS

Sep 25, 2016

DIY 3D Printed Compressed Air Tank by CVRA

CVRA (Club Vaudois de Robotique Autonome) is a group of students and engineers passionate about robotics. It is based in Renens, Switzerland. They needed a compressed air tank for their robot project that could hold 4 bar (400kPa) of pressure.
They made several 3d printed prototypes in PLA and were successful in the end with tank holding some 6,5 bar sealed with some acrylic coating.
Interesting experiment, but be aware that pressurizing plastic containers with gas can lead to serious explosion.





















Here is the advanced prototype sealed with "Doc Blue" sealant pressure tested under water:




Project homepage with extensive information and progression of development:

http://www.cvra.ch/blog/2016/airtank

Here is the Hackaday post with lot of safety concerns and possible problems with this concept:

http://hackaday.com/2016/06/02/3d-printing-compressed-air-tanks/

Stay safe kids!

Anti-Taser 3D Printed Chainmail

GreekGadgetGuru 3d printed a DIY mail armor and proved that it works well against taser stun baton.





It is also slightly slash and cut resistant ...



































We are living in a strange times kids. Just sayin' ...

Makerbot Releases New 3D Printers and Declares the End of Consumer Market

Makerbot released their new 3d printers in some sort of public display of masochism. Why did you do this Makerbot?
The 3d printers are basically just a slight upgrades from previous models with larger print volume. It is aimed at "professional" market. Looks like you guys are mostly just not good enough profitable group for their stuff.




You can see their new stuff here;

https://www.makerbot.com/products/3d-printers/

Oh yes, they also have a new free slicer: the Makerbot Print

https://www.makerbot.com/print/

Here is Angus from Maker's Muse with some thoughts I can mostly agree with:

3D Printing and Marxism

We are still in a world that is dominated by political debates from old times and old technological systems.





Source: unknown

Sep 20, 2016

NinjaFlex 3D Printed Metamaterial Mechanisms

Team of researchers at Hasso Plattner Institute, Potsdam, Germany developed a technique that gives internal structure to objects that they printed on Ultimaker 2 in NinjaFlex filament. Since the structure is designed it gives the object mechanical movements enabling it to act as a tool or a device. 

From project description:
Recently, researchers started to engineer not only the outer shape of objects, but also their internal microstructure. Such objects, typically based on 3D cell grids, are also known as metamaterials. Metamaterials have been used, for example, to create materials with soft and hard regions.

So far, metamaterials were understood as materials—we want to think of them as machines. We demonstrate metamaterial objects that perform a mechanical function. Such metamaterial mechanisms consist of a single block of material the cells of which play together in a well-defined way in order to achieve macroscopic movement. Our metamaterial door latch, for example, transforms the rotary movement of its handle into a linear motion of the latch. Our metamaterial Jansen walker consists of a single block of cells—that can walk. The key element behind our metamaterial mechanisms is a specialized type of cell, the only ability of which is to shear.

In order to allow users to create metamaterial mechanisms efficiently we implemented a specialized 3D editor. It allows users to place different types of cells, including the shear cell, thereby allowing users to add mechanical functionality to their objects. To help users verify their designs during editing, our editor allows users to apply forces and simulates how the object deforms in response.



Personally I find that the software for design of those metamaterials is the most interesting part and would be of great use for DIY and Maker community. I don't know who has the property rights to that code, but I think if the research was funded by public money the code should be open sourced.


Project homepage:

http://hpi.de/baudisch/projects/metamaterial-mechanisms.html

PDF research paper with much more information:

http://alexandraion.com/wp-content/uploads/2016UIST-Metamaterial-Mechanisms-authors-copy.pdf



MERL 5D Printing on a Custom Delta

After 4D printing comes 5d printing. It's just a fancy name for five axis 3D printing that enables more strength due to layers being extruded in optimized paths to resist more pressure force.
It is developed at  Mitsubishi Electric Research Laboratories (MERL) on a custom delta machine with movable printbed.




Here is the explainer video:





PDF research paper on the topic:

http://www.merl.com/publications/docs/TR2016-101.pdf

More on the researcher:

http://www.merl.com/people/yerazunis

Sep 19, 2016

DIY Polycarbonate Sheet Dehumidifier Chamber for your Filament

Akshay Gupta developed a 3d printing filament dehumidifier you can build yourself. It is made from common polycarbonate sheets and uses an Arduino, a cross flow fan, silica gel desiccant, sensors and a 100W heater to maintain a specific temperature and humidity in the chamber.

As you can see it can hold many spools of filament:




































Looks like the great solution to keep your filament dry.

Detailed build guide:

http://www.instructables.com/id/Filament-Dehumidifier/?ALLSTEPS

Octowatch and Octowatch2 Pebble Smartwatch Apps

Jason Gullickson from Wisconsin developed a small app for the Pebble smartwatch that enables you to monitor your 3d printer remotely via Octoprint API.



Get it at:

https://github.com/jjg/octowatch

Hackaday.io page:

https://hackaday.io/project/164-octowatch


Octowatch 2 is inspired by original Octowatch but it was completely developed from beginning and re-written. The developer is Dominik Scholz.



GitHub page:

https://github.com/schlotzz/octowatch2/

Future of both apps is uncertain since Fitbit bought Pebble and basically destroyed the functionality of entire Pebble line with no future device coming out.

Voodoo of Prusa I3 XYZ Automatic Leveling





Read more about it at Prusa homepage:

http://prusaprinters.org/first-printer-to-automatically-correct-geometry-in-all-axes/

Fully 3D Printable DIY mITX Computer Case

PawnBoy developed and shared his design of a fully 3d printable mITX computer case. It looks interesting but I'm not sure if all parts can be done in one piece. In any case if it's not 100% reproducible, it probably just needs some minor tweaks and it's a good base for further projects.













For all the files look at:

http://www.instructables.com/id/3D-Printed-MITX-Computer-Case/?ALLSTEPS

3dpBurner Open Source Laser Cutter and Engraver

3dpBurner is a DIY laser engraver and cutter project that uses 3d printed parts for the structural elements and movements. It also uses many standard parts like laser diodes and Arduino to make it work.

Here is what the developer writes about this project:
It is created with the same RepRap concept, by using 3D printed parts and some easy to find "vitamins" (non printed hardware).
I tried to design as cheap as possible, by using common electronics and a "low power" laser (a laser diode).
The X/Y working area is fully customisable by simply cutting the rods to desired length.
The max object height for working can be up to 50-60mm.
3dpBurner basically uses 3D printed parts, 8mm rods, M3/M8 hardware, some small bearings and a pair of GT2 pulley/belts. I got most parts from my "old" RepRap printer.
Motion is controlled by Arduino UNO, a CNC shield and a pair of Pololu based stepper drivers for driving two NEMA17 stepper motors.

The laser module is cooled by heatsink and forced air (small fan) and is drived by a constant current driver.
Personally I'm using the popular NDB7875 1.6W blue laser diode (note this diode is sold as being capable of up to 3W when overdrived), but you can use your own diode (DVD recorder, BluRay, M140...).

While 3dpBurner can be controlled by mostly GRBL based applications (gcode senders), i create a pair of Windows based ones. They provides an easy control and optimized gcode streaming for the GRBL firmware and also can be used for convert images to gcode files for gray scale engravings.

3dpBurner in action:



Project homepage with all the instructions how to make one:

http://3dpburner.blogspot.com/



Printtable DIY 3D Printer Made from IKEA Lack Tables

Wayne developed the Printtable 3D printer that uses IKEA table as a frame. It is sturdy and low in cost to make. And it gives a good use for those ugly IKEA furniture pieces if I may add.

Early version:




More detailed view:




CAD animation:




Extremely detailed step-by-step construction guide:

http://www.instructables.com/id/PRINTTABLE-the-Affordable-Attractive-IKEA-Lack-Tab/

Project homepage:

http://printtable.com/

Forum thread on 3dhubs:

https://www.3dhubs.com/talk/thread/just-finished-large-build-printer-using-ikea-lack-tables



Sep 18, 2016

Low Cost DIY UV Curing Chamber

kidNeutrino shared this great solution to UV curing of resin 3d printed parts. It's a low cost DIY solution that can be made for some 30 USD and consists of aluminum foil covered cardboard box and a gel nail dryer lamp.
You just put your part in, turn on the dryer UV lamp and let it cure.
























Instuctables page with step-by-step build guide:

http://www.instructables.com/id/Low-Cost-UV-Curing-Box-for-3D-Resin-Prints/?ALLSTEPS

Jonathan Odom's 3D Printable Wireless Lantern Based on Qi Inductive Power Technology

Jonathan Odom developed and shared his great looking DIY 3d printable LED lamp. This battery powered wireless charging lantern will glow for 1.5 hours on a single charge. It works with a few cheap electronic parts and a USB charger. The USB cable plugs into the base, and the lamp sits on the base and charges through induction via Qi Universal transmitter and receiver.
The lamp housing, charging base, and lens are all 3D printed on a almost any standard FDM printer since the lamp is a 5" X 5" (127mm X 127mm) cube.


































Extremely detailed build guide with all the .STL files can be found at:

http://www.instructables.com/id/3D-Printed-Wireless-Lantern/?ALLSTEPS

MADspace Advanced Robotics System 3D Printable Rover

The MADspace Advanced Robotics System (M.A.R.S.) rover is a 3D printable space exploration rover. It can be used in education, DIY science and development.




























Key features:
  • 6 driven wheels of which 4 can steer (pod wheels)
  • Rocker bogie suspension (semi-active, 2 shoulder servos)
  • Gyroscope
  • 16 channel I2C PWM driver
  • Raspberry Pi
  • 2 logitech c270 webcams with pan/tilt
  • Web interface written in web.py
  • Two 10Ah 5V battery packs, one for drive and one for logic.
Here is the video of first rover movements:



Project homepage with all the parts and instructions:

https://www.wevolver.com/wevolver.staff/m.a.r.s./main/description/

MARS was developed in Eindhoven MADspace by:

  • Paul Wagener (lead software)
  • Tom Geelen (Embedded control and mathematics)
  • Serdar Yildirim (all round)
  • Guus van der Sluijs (Project leader and lead mechanical)

Sep 17, 2016

NVPro 3D Printer with Automatic Parts Removal

New Valence Robotics teases their new 3D printer: the NVPro. Interesting feature is the integrated automatic parts removal.
It ejects the part from the build plate, so you can keep continuously printing new things. We will see it in realistic operating conditions hopefully...

Here is the product teaser:



Homepage:

http://nvbots.com/products/

If you want something similar in your machine there is a DIY project:

http://diy3dprinting.blogspot.com/2013/06/reprap-automatic-printing-and-model.html

How to make big silicone molds from 3D printed objects

Volum3 from Romania made a tutorial on how to make large molds with several 3D printed parts acrylic plaster and silicone that can be used to cast relatively big objects from polyurethane foam.




Instructables page:

http://www.instructables.com/id/How-to-Make-a-Cheap-Silicone-Mold-of-a-3D-Printed-/




Single Actuator Wave-like 3D Printed Robot

SAW is a 3d printed robot that can crawl, swim and climb using wave motions with only one motor. And it looks creepy.

From project description:
SAW (single actuator wave-like robot) is the first robot that produces a pure wave-like motion with a single motor. The robot was developed for medical, industrial and search and rescue purposes. The design is simple, 3D printed and the passive wheels are for steering only. In the movie we show that the robot can crawl over different surfaces, climb and swim. It reached a maximum speed of 57 cm/s which is 5 times faster than any other similar robot.
The robot's design is simply and highly reliable very little maintenance was needed.
The robot's motion is similar to the "do the worm" dance.
The robot was developed at the Bioinspired and medical Robotics lab at BGU by David Zarrouk, Moshe Mann, Nir Dgani, Ilanit Waxman, Tal Yehuda, Nissan Jerbi and Amotz Hess.



Research paper:

http://iopscience.iop.org/article/10.1088/1748-3190/11/4/046004



Sep 12, 2016

3DGence ONE review by 3D Printing Nerd

Here is a review of 3DGence ONE by Joel, the 3D Printing Nerd. The ONE is a flagship that is built like a tank with some interesting features.



Here is the 3DGence homepage:

http://3dgence.com/

Sep 11, 2016

Laser-assisted Advanced 3D Printing with Silver Ink

Researchers at Harvard’s Wyss Institute for Biologically Inspired Engineering and the John A. Paulson School of Engineering and Applied Sciences (SEAS) developed a new 3D printing method.

They use a miniature nozzle to spray silver ink that is solidified by lasers in midair to produce self-supporting 3D structures.

The application of this technology will probably be in advanced electronics circuits production or biomedical devices.




























Here is the video of the process:



Source and more information:

http://www.pnas.org/content/suppl/2016/05/11/1525131113.DCSupplemental

http://www.pnas.org/content/113/22/6137.abstract

http://www.pnas.org/content/suppl/2016/05/11/1525131113.DCSupplemental/pnas.201525131SI.pdf

Introduction to Stepper Motors

Here is a great video that explains everything you wanted to know about stepper motors but were afraid to ask :-)



Great work GreatScott! Thanks for the content!

Easy WiFi 3D Printer sharing with Microsoft IoT Core

I'm not a Microsoft fan but it looks like their IoT Core on a Raspberry Pi can get easy WiFi connectivity and network sharing for many popular 3D printers with simple app install.

Here is the video explaining the setup:




It currently supports the following printers:
  • Lulzbot Taz 6
  • Makergear M2
  • Printrbot Play, Plus and Simple
  • Prusa i3 and i3 Mk2
  • Ultimaker Original and Original+
  • Ultimaker 2 and 2+
  • Ultimaker 2 Extended and Extended+
... but more will surely be added in the future ...

Get all the information needed to do it yourself at:

https://developer.microsoft.com/en-us/windows/iot/Docs/3DPrintServer.htm

or

https://blogs.windows.com/buildingapps/2016/05/20/network-3d-printing-with-windows-10-iot-core/



Thor Open Source Robotic Arm from Spain

Thor is an Open Source and 3D printable robotic arm with six degrees of freedom developed by Ángel Larrañaga Muro from Madrid, Spain.

Its configuration (yaw-roll-roll-yaw-roll-yaw) is the same one that is used on most manipulator robots that currently exist in the market. In its upright position, Thor is about 625mm and it can lift objects up to 750 grams.

Here is the video showing Thor in action:




Here is the CAD animation of the assembly process:


You can get all the files and learn about Thor at:

https://hackaday.io/project/12989-thor

https://github.com/AngelLM/Thor



Sep 10, 2016

BCN3D Moveo Open Source 3D Printed Robotic Arm

BCN3D presents Moveo, a fully 3d printable open source robotic arm. Another step toward fully robotic world where we puny humans will be free of any work :-)




From project description:

BCN3D Technologies keeps taking important steps in order to achieve his goal of bringing the digital manufacturing technology to everyone. In this occasion we are presenting the BCN3D Moveo, a robotic arm design from scratch and developed by our engineers in collaboration with the Departament d’Ensenyament from the Generalitat de Catalunya.
Its structure is fully printed using additive manufacturing technologies and its electronics are controlled by the software Arduino. The BCN3D Moveo has 5 axis.
Moveo, fully functional nowadays, has been born, as all the BCN3D Technologies products, with an open and educational wish.
As we have done with all our developed pordutcs, the BCN3D Moveo files will be available for everyone. Thanks to the platform Github, a website where users around the world share their designs, anyone will be able to obtain all the necessary information in order to assemble his own BCN3D Moveo at home.
Nevertheless, BCN3D will fee all the Moveo know how on our Github account, as we have been doing with all the BCN3D Technologies products. Thus, the users will be able to find the bill of material (BOM), where all the needed components for the assembling of the arm come detailed, as the CAD designs, so anyone will be able to modify the BCN3D Moveo design as they wish.
Furthermore, the Github users will find the STL files for the structure printing and the assembling, fine tuning and firmware upload manuals, which will be available both in English and Spanish.

Download the BCN3D Moveo CAD files, the STL files, the assembly and user manual and the Bill of Materials on our Github: https://github.com/BCN3D

Project homepage: https://www.bcn3dtechnologies.com/en/bcn3d-moveo-the-future-of-learning/